Technology Module Replacement

Removing the technology module from the Wristag, and reinstalling it in another Wristag strap or a Tag Holder, is a very easy process.  Simply follow the below instructions and pictures.

1.  Grab the two straps of the Wristag as shown in Picture 1 and apply pressure with thumbs on the technology module.  You should be applying pressure from thumbs on the face of the Wristag.

Picture 1

2. While applying pressure with thumbs on technology module, bend the Wristag straps in the opposite direction of their normal curve as shown in Picture 2.

Picture 2

3.  Continue applying pressure to the module with thumbs while bending the straps.  The technology module will pop-out from the strap as shown in Picture 3.

Picture 3

4.  The module will separate from the strap and you will now have 3 pieces as shown in Picture 4.                             

Picture 4

5.  To install the technology module into either a Wristag or Tag Holder, first align the flanges on the edges of the technology module with the slits in the casing as shown in Picture 5.

Picture 5

6.  Next, stretch the other end of the Wristag Strap or Tag Holder over the other end of the technology module as shown in Picture 6.

Picture 6

7.  Adjust the strap or Tag Holder so it fits snuggly on the module as shown in Picture 7.  Be sure that if you are installing the technology module into a Tag Holder that you have the technology module facing the correct direction as shown in Picture 8.  (The front of the Tag Holder has the beveled edge for the bezels.)

               
                 Picture 7                                         Picture 8

8.  Reinstall the bezel as show in Picture 9.

Picture 9

Photography by Kenneth Gall
http://www.kennethgall.com