If your Wristag
latch breaks and a replacement is sent to you, you can
easily replace the broken latch by following these simple
instructions. Replacement is no more difficult
than replacing the strap on a wristwatch.
First, remove the old latch by
inserting a push pin or similar object into the hole on the
side of the latch as show in Picture 1.
The latch should easily come apart
as shown in Picture 2. Make sure the pin stays in the
strap and is centered so equal amounts of the pin extend on
each side of the strap. Discard the old latch.
Insert one of the pins into the
hole on one side of the latch. Then pop the other end
of the pin into the other hole on the latch. Make sure
the pins seat firmly into the holes by twisting the latch on
the strap and ensuring that the strap does not come loose.
|
