Replacing Your Wristag Latch

If your Wristag latch breaks and a replacement is sent to you, you can easily replace the broken latch by following these simple instructions.  Replacement  is no more difficult than replacing the strap on a wristwatch.

First, remove the old latch by inserting a push pin or similar object into the hole on the side of the latch as show in Picture 1.

  Picture 1

The latch should easily come apart as shown in Picture 2.  Make sure the pin stays in the strap and is centered so equal amounts of the pin extend on each side of the strap. Discard the old latch.

Picture 2

Insert one of the pins into the hole on one side of the latch.  Then pop the other end of the pin into the other hole on the latch.  Make sure the pins seat firmly into the holes by twisting the latch on the strap and ensuring that the strap does not come loose.